FAVORIT 55002 VIENDISHWASHER USER MANUAL
Activate the appliance. The appliance is not in setting mode when:• Only one programme indicator comes on.• The display shows the time of the washing
If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function(refer to 'Multitab
Electronic adjustment1. Activate the appliance. Make sure that the appliance is in setting mode.2. Press and hold function buttons (B) and (C) at the
USE OF DETERGENT AND RINSE AID2030MAX1234+-1234567Use of detergentTo help the environment, do not use more than the correct quantity of detergent.Obey
You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (highestdosage).Turn the rinse aid selector 4 to increase or decrea
Hints and tips• Do not put in the appliance items that can absorb water (sponges, household cloths).• Remove the remaining food from the items.• Make
Consumption valuesProgramme1)Energy (kWh) Water (litre)0.9 - 1.7 8 - 151.5 - 1.6 13 - 140.9 90.9 - 1.0 9 - 110.1 41) The display shows the programme t
Cancelling the delay startIf the appliance door is open, and the countdown has not started1. Press the delay button again and again until the display
CARE AND CLEANINGTo remove and clean the filtersDirty filters decrease the washing results.Although the maintenance is very low with these filters, ma
If the holes in the spray arms become clogged, remove remaining parts of soil with a thinpointed object.To clean the external surfacesClean the extern
FOR PERFECT RESULTSThank you for choosing this AEG product. We havecreated it to give you impeccable performance for manyyears, with innovative techno
Malfunction Possible cause Possible solution The mains plug is not connec-ted in the mains socket.Connect the mains plug. The fuse in the fuse box i
Problem Possible cause Possible solutionThere are streaks, whitishstains, or a bluish layer onglasses and dishes.The rinse aid quantity is toohigh.Dec
Water supply 1)Cold water or hot water maximum 60 °CCapacity Place settings 121) Connect the water inlet hose to a water tap with a 3/4'' th
23
www.aeg.com/shop 117932340-A-072011
CONTENTS4 Safety information7 Product description8 Control panel10 Use of the appliance11 Setting the water softener12 Use of dishwasher salt13 Use of
SAFETY INFORMATIONBefore the installation and use, read this manual carefully:• For your safety and the safety of your property.• To help the environ
• Fill the appliance with salt before you start a washing programme. Remaining salt in theappliance can cause corrosion or make a hole in the bottom o
• Make sure not to squash or cause damage to the water hoses when you install the appli-ance.• Make sure that the water couplings are tight to prevent
To discard the appliance• To prevent the risk of injury or damage:– Disconnect the mains plug from the mains socket.– Cut off the mains cable and disc
7 Filters8 Lower spray arm9 Upper spray arm10 Top spray armVisual signal• When the washing programme starts, a red visual signal shows on the floor be
After ten minutes from the end of the washing programme, the AUTO OFF function auto-matically deactivates the appliance. This helps to decrease energy
Commenti su questo manuale